AS 1530.1 for Non-Combustibility

来源：线缆CPR认证服务平台浏览：72次发布于：2024-4-2

Non-combustibility is tested for compliance through the requirements of Australian Standard AS 1530.1. The test procedure requires several cylindrical material samples which are inserted into a test crucible set at 750°C for at least 30 minutes or whenever equilibrium occurs.

The test monitors flaming of the sample as well as the temperature of the furnace, sample surface and the centre of the sample.

The Building Code of Australia (BCA) through Clause A1.1 defines non-combustibility as a material not deemed combustible as determined by AS 1530.1 - Combustibility tests for Materials.

External wall materials of buildings of Type A and B construction are required to be of non-combustible materials. In addition, wall and ceiling linings as well as other wall materials such as insulation and weatherproofing have baseline requirements under the BCA is to be non-combustible.

The test samples are required to be conditioned. This can take up to a week with testing occurring after the conditioning is complete. Six samples being 44-46mm in diameter and 48-52mm in height are required. A 2mm hole is required to be drilled through the centre.

Contact Us:

Tel: (+86) 25 86583475 (+86) 25 86583465
Web: www.fire-test.com www.firete.com
Email: info@fire-test.com fanghuo@vip.163.com
WeChat：firetesting 或 17714189018
...

上一条：电线电缆EN45545-2最新版欧标机车材料防火检测
下一条： AS 5113 - For External Wall Fire Spread

线缆CPR认证

认证服务

测试标准

联系我们

AS 1530.1 for Non-Combustibility