欧盟CE认证是欧盟市场的强制认证，需要根据相应的协调标准由欧盟公告号实验室测试及认证，才能颁发CE证书。欧盟CE认证机构的选择上一定要选择相应能力的欧盟公告号实验室（Notified Body），一般来说欧盟公告号实验都在欧洲境内。南京睿督公司为欧盟公告号NB1301的授权合作实验室，专业提供如下建材产品CE认证。更多请咨询南京睿督公司，咨询电话：025-8658 3475。

CPR法规下CE认证对实验室的要求
CPR法规下CE认证必须在欧盟公告号实验室进行测试认证，由欧盟公告号实验室测试及发证。从2013年7月1日起，欧盟建筑产品CPR法规（No.305/2011/EC-CPR）已取代旧的欧盟建筑产品CPD指令（89/106/EEC-CPD），CPR法规后对建筑产品CE认证的要求更加严格。

南京睿督&欧盟公告号NB1301能力范围
EN50575:2014+A1:2016：标准是对电力、控制和通信电缆、光缆在建筑施工期间要符合防火性要求。
EN 13501-6：建筑产品和部件燃烧性能的分类，根据燃烧试验反应的试验数据对电线电缆防火等级分类
EN 50399：着火条件下电缆的通用试验，火焰蔓延试验中测量热释放量和冒烟量－测试仪器、程序和结果。
EN60332-1-2：单根绝缘电线或电缆在火焰条件下的垂直燃烧测试
EN 60754-2：电线电缆燃烧时释放出气体的试验，第2部分用测量PH值和导电性方法对电缆中的材料燃烧时释放出气体的酸度的测试。
EN 61034-2： 在规定条件下燃烧的电缆的烟密度的测量，测试程序及要求
EN ISO 1716 建筑产品及制品的燃烧性能燃烧热值的测定

EN 40-4:2005 Lighting Columns-Part 4: Requirements for reinforced and prestressed concrete lighting columns EN 40-4:2005 灯柱-钢筋混凝土和预应力混凝土灯柱的要求。
EN 40-4:2005/AC:2006 Lighting Columns-Part 4: Requirements for reinforced and prestressed concrete lighting columns EN 40-4:2005灯柱-钢筋混凝土和预应力混凝土灯柱的要求。
EN 40-5:2002 Lighting Columns-Part 5: Requirements for steel lighting columns EN 40-5:2002 灯柱-钢灯柱的要求
EN 40-6:2002 Lighting Columns-Part 6: Requirements for aluminium lighting columns EN 40-6:2002灯柱-铝灯柱的要求

EN 1317-5:2007+A2:2012 Road Restraint systems-Part 5: Product requirements and evaluation of Conformity for vehicle restraint systems EN 1317-5:2007+A2:2012道路防护系统. 第5部分 产品要求和车辆约束设备的产品要求和合格评估
EN 1317-5:2007+A2:2012/AC:2012 Road Restraint systems-Part 5: Product requirements and evaluation of Conformity for vehicle restraint systems 道路防护系统. 第5部分 产品要求和车辆约束设备的产品要求和合格评估
EN 13830:2003  Curtain wall-product standard 幕墙－产品标准
EN 14080:2013 Timber structures-glued laminated timber-Requirement 木结构-胶合板-要求 
EN 14374:2004  Timber structures-Structural laminated veneer lumber-Requirements 木结构-结构层积单板材-要求 

EN 13986:2004 Wood-based panels for use in construction-Characteristics, evaluation of conformity and marking 建筑用木质板条-特性，合格评定和标记
EN 13986:2004+A1:2015 Wood-based panels for use in construction-Characteristics, evaluation of conformity and marking 建筑用木质板条-特性，合格评定和标记
EN 413-1:2011 Masonry cement-Part 1: Composition, specifications and conformity criteria 砌筑水泥.第1部分:组成,规范和合格标准
EN 197-1:2011 Cement-Composition, specifications and conformity criteria for common cements 水泥-普通水泥的组成、规格和一致性标准
EN 14216:2004 Cement-Composition, specifications and conformity criteria for very low heat special 水泥-超低热专用水泥的组成、规格和一致性标准

EN 14216:2015 Cement-Composition, specifications and conformity criteria for very low heat special 水泥-超低热专用水泥的组成、规格和一致性标准
EN 15743:2010 Supersulfated cement. Composition, specifications and conformity criteria 富硫酸盐水泥.组分、规范和一致性标准
EN 15743:2010+A1:2015 Supersulfated cement. Composition, specifications and conformity criteria 富硫酸盐水泥.组分、规范和一致性标准
EN 14647:2005 Calcium aluminate cement-Composition, specifications and conformity criteria 铝酸钙水泥.成分,规范和一致性标准
EN 14647:2005/AC:2006 Calcium aluminate cement-Composition, specifications and conformity criteria 铝酸钙水泥.成分,规范和一致性标准

EN 13813:2002 Screed material and floor screeds-Screed material-Properties and requirements 找平层材料和沥青地面，找平层材料，性能和要求。
EN 14509:2013 Self-supporting double skin metal faced insulating panels-Factory made products-Specifications 自撑式双面金属绝缘板-工厂制作产品-规范
EN 14351-1:2006+A1:2010 Windows and doors-Product standard, performance characteristics-Part 1: Windows and external pedestrian doorset without resistance to fire and/or smoke leakage characteristics
门窗，产品标准、性能特征，无防火或无防毒特性的窗和入户门"
EN 13964:2004 Suspended ceilings-Requirements and test methods.吊顶-要求和试验方法
EN 13964:2004/A1:2006 Suspended ceilings-Requirements and test methods.吊顶-要求和试验方法

EN 13964:2014 Suspended ceilings-Requirements and test methods.吊顶-要求和试验方法
EN 13859-1:2010 Flexible sheets for waterproofing-Definitions and characteristics of underlays Part 1: Underlays for discontunuous roofing 防水用柔性薄板材.衬底的定义和特性.第1部分:不连续屋顶用衬底
EN 15814:2011+A2:2014 Polymer modified bituminous thick coatings for waterproofing-Definitions and requirements 防水用聚合物改性沥青厚涂层.定义和要求
EN 13859-2:2010 Flexible sheets for waterproofing-Definitions and characteristics of underlays Part 2: Underlays for walls 防水用软薄板.垫层的定义和特性.墙衬
EN 13984:2013 Flexible sheets for waterproofing-Plastic and rubber vapour control layers-Definitions and characteristics. 防水柔性板材－塑料和橡胶蒸汽控制层－特征及定义

EN 13162:2012+A1:2015 Thermal insulation products for buildings - Factory made mineral wool (MW) products - Specification 建筑物隔热产品，工厂生产矿物棉(MW)产品，规范
EN 13163:2012+A1:2015 Thermal insulation products for buildings-Factory made expanded polystyrene (EPS) products-Specifications 建筑物隔热产品-工厂生产膨胀聚苯乙烯(EPS)-规范。
EN 13164:2012+A1:2015 Thermal insulation products for buildings - Factory made extruded polystyrene foam (XPS) products - Specification. 建筑用隔热产品－工厂生产聚苯乙烯泡沫（XPS）产品规范。
EN 13165:2012+A1:2015 Thermal insulation products for buildings-Factory made rigid polyurethane foam (PU)-Specification 建筑用隔热产品－工厂生产聚氨酯泡沫（PU）产品－规范
EN 13166:2012+A1:2015 Thermal insulation products for buildings-Factory made products of phenolic foam(PF)-Specification 建筑用隔热产品－工厂生产石炭酸泡沫（PF）产品－规范

EN 13167:2012+A1:2015 Thermal insulation products for buildings. Factory made cellular glass (CG) products. Specification.建筑用隔热产品-工厂生产泡沫玻璃 (CG) 产品. 规范。
EN 13168:2012+A1:2015 Thermal insulation products for buildings-Factory made wood wool(WW)-Specification 建筑用隔热产品－工厂生产木丝（WW）产品－规范
EN 13169:2012+A1:2015 Thermal insulation products for building-Factory made products of expanded perlite(EPB)-Specification. 建筑用隔热产品－工厂生产发泡珍珠岩（EPB）产品－规范
EN 13170:2012+A1:2015 Thermal insulation products for buildings-Factory made products of expanded cork(ICB)-Specification 建筑用隔热产品－工厂生产膨胀软木（ICB）产品－规范
EN 13171:2012+A1:2015 Thermal insulation products for buildings - Factory made wood fibre (WF) products - Specification. 建筑用隔热产品－工厂生产木纤维（WF）产品规范。

EN 14063-1:2004 Thermal insulation products for buildings -In-situ formed expanded clay lightweith aggregate products-Part 1: Specification for the loose-fill produtcts before installation 隔热材料及制品-原位形成膨胀粘土轻骨料产品-第1部分:规范的松散填充安装前的产品
EN 14063-1:2004/AC:2006 Thermal insulation products for buildings -In-situ formed expanded clay lightweith aggregate products-Part 1: Specification for the loose-fill produtcts before installation 隔热材料及制品-原位形成膨胀粘土轻骨料产品-第1部分:规范的松散填充安装前的产品
EN 14303:2009+A1:2013 Thermal insulation products for building equipment and industrial installations-Factory made mineral wool (MW) products-Specification.工业装置和建筑设备用隔热产品工厂制矿棉(MW)产品规范
EN 14304:2009+A1:2013 Thermal insulation products for building equipment and industrial installations -Factory made flexible elastomeric foam (FEF) products-Specification.工业装置和建筑设备用隔热产品工厂制柔性弹性泡沫(FEF)产品规范
EN 14305:2009+A1:2013 Thermal insulation products for building equipment and industrial installations -Factory made cellular glass (CG) products-Specification.工业装置和建筑设备用隔热产品工厂制多孔玻璃(CG)产品规范

EN 14306:2009+A1:2013 Thermal insulation products for building equipment and industrial installations -Factory made calcium silicate (CS) products-Specification.工业装置和建筑设备用隔热产品工厂制硅酸钙(CS) 产品规范
EN 14307:2009+A1:2013 Thermal insulation products for building equipment and industrial installations -Factory made extruded polystyrene foam(XPS) products-Specification.工业装置和建筑设备用隔热产品工厂制挤塑聚苯乙烯(XPS) 发泡产品规范
EN 14308:2009+A1:2013 Thermal insulation products for building equipment and industrial installations -Factory made rigid polystyrene foam (PUR) and polyisocyanurate foam (PIR) products-Specification.工业装置和建筑设备用隔热产品工厂制硬质聚氨酯泡沫(PUR)及聚异氰脲酸酯(PIR)产品规范 
EN 14309:2009+A1:2013 EN 14309 Thermal insulation products for building equipment and industrial installations -Factory made expanded polystyrene (EPS) products-Specification.工业装置和建筑设备用隔热产品工厂制聚苯乙烯发泡(EPS)产品规范
EN 14313:2009+A1:2013 Thermal insulation products for building equipment and industrial installations -Factory made polyethylene foam (PEF) products-Specification.工业装置和建筑设备用隔热产品工厂制聚乙烯泡沫(PEF)产品规范

EN 14314:2009+A1:2013 Thermal insulation products for building equipment and industrial installations -Factory made phenolic foam (PE) products-Specification.工业装置和建筑设备用隔热产品工厂制酚醛泡沫(PE)产品规范
EN 14315-1:2013 Thermal insulating products for buildings-In-situ formed sprayed rigid polyurethane (PUR) and polyisocyanurate (PIR) foam products. Part 1: Specification for the rigid foam spray system before installation.
EN 14315-1:2013 建筑物用隔热产品－现场制喷涂硬质聚氨酯(PUR)和聚异氰脲酯(PIR)泡沫产品，第1部分：硬质泡沫喷雾系统安装前规范。

EN 14318-1:2013 Thermal insulating products for buildings - In-situ formed dispensed rigid polyurethane (PUR) and polyisocyanurate (PIR) foam products - Part 1: Specification for the rigid foam dispensed system before installation  EN 14318-1:2013 建筑物用隔热产品.现场形成分散硬质聚氨酯(PUR)和聚异氰脲酯(PIR)泡沫产品.第1部分:硬质泡沫分散系统安装前规范
EN 14319-1:2013 Thermal insulating products for building equipment and industrial installations - In-situ formed dispensed rigid polyurethane (PUR) and polyisocyanurate (PIR) foam products - Part 1: Specification for the rigid foam dispensed system before installation
EN 14319-1:2013 建筑设备与工业装置用隔热产品.现场形成分散硬质聚氨酯(PUR)和聚异氰脲酯(PIR)泡沫产品.第1部分:硬质泡沫塑料分散系统安装前规范.

EN 14320-1:2013 Thermal insulating products for building equipment and industrial installations -In-situ formed sprayed rigid polyurethane (PUR) and polyisocyanurate foam (PIR) products - Part 1: Specification for the rigid foam spray system before installation
EN 14320-1:2013 建筑设备与工业装置用隔热产品－现场安装成型喷雾硬质聚氨酯(PUR)和聚异氰脲酯(PIR)泡沫产品－第1部分：硬质泡沫喷涂系统安装前规范。

EN 14933:2007 Thermal insulation and light weight fill products for civil engineering applications-Factory made products of expanded polystyrene (EPS)-Specification
EN 14933:2007 隔热和轻质填装制品土工工程中的应用－工厂制造的发泡聚苯乙烯（EPS)－规格
EN 14934:2007 Thermal insulation and light weight fill products for civil engineering applications-Factory made products of extruded polystyrene foam（XPS）-Specification      EN 14934:2007 土木工程用隔热和轻质填装制品－工厂制挤压泡沫聚苯乙烯(XPS)产品－规范。
EN 15501:2013 Thermal insulation products for building equipment and industrial installations-Factory made expanded perlite (EP) and exfoliated vermiculite (EV) products-Specification
EN 15501:2013 建筑设备和工业装备用隔热产品-工厂制造膨胀珍珠岩(EP)及有孔粒料（EV）产品－规格。
EN 16069:2012+A1:2015 Thermal insulation products for buildings-Factory made products of polyethylene foam products of polyethylene foam (PEF)-Specification
EN 16069:2012+A1:2015建筑物隔热产品－聚乙烯泡沫(PEF)工厂制品－规格。
EN 14351-1:2006+A2:2016 Windows and doors-Product standard, performance characteristics-Part 1: Windows and external pedestrian doorsets
EN 14351-1:2006+A2:2016 门窗－产品标准－性能特征－第1部分：窗和入户门

EN 16034:2014 Pedestrian doorsets, industrial, commercial, garage doors and openable windows - Product standard, performance characteristics - Fire resisting and/or smoke control characteristics
EN 16034:2014 行人门, 工业, 商业, 车库门和可开启的窗户－产品标准，性能特征，耐火和/或烟控特性。
EN 14889-1:2006 Fibers for concrete-Part 1: Steel fibers-Definitions, specification and conformity. EN 14889-1:2006 混凝土用纤维，第1部分：钢纤维的定义、性能及一致性。
EN 14889-2:2006 Fibers for concrete-Part 2: Polymer fibers-Definitions, specification and conformity.
EN 14889-2:2006 混凝土用纤维，第2部分：聚合物纤维的定义、性能及一致性。
EN 13263-1-2005+A1-2009 Silica fume for concrete-Part 1: Definitions, requirements and conformity criteria
EN 13263-1-2005+A1-2009 混凝土用硅微粉-定义、要求及评估。
EN 15167-1:2006 Ground granulated blast furnace slag for use in concrete, mortar and grout－Part1: Definitions, specifications and conformity criteria 
EN 15167-1:2006 用于混凝土、砂浆和水泥浆中的粒化高炉矿渣粉－第1部分：定义、规范和合格标准。

EN 1096-4:2004 Glass in building-Coated glass-Part 4: Evaluation of conformity/Product standard
EN 1096-4:2004 建筑玻璃-镀膜玻璃-第4部分:合格评价/产品标准
EN 12150-2:2004 Glass in building-Thermally toughened soda lime silicate safety glass-Part 2: Evaluation of conformity/Product Standard
EN 12150-2:2004建筑物用玻璃－热增韧钠钙硅酸盐安全玻璃－第2部分：合格评定/产品标准
EN 12337-2:2004 Glass in building-Chemically strengthened soda lime silicate glass-Part 2: Evaluation of conformity/Product Standard
EN 12337-2:2004建筑玻璃－化学增强钠钙硅酸盐玻璃－第2部分：合格评定/产品标准
EN 13024-2:2004 Glass in building-Thermally toughened borosilicate safety glass -Part 2: Evaluation of conformity/Product Standard
EN 13024-2:2004建筑玻璃－热钢镄硼硅酸盐安全玻璃－第2部分：合格评定/产品标准
EN 14178-2:2014 Glass in building-Basic alkaline earth silicate glass products-Part 2: Evaluation of conformity/Product standard
EN 14178-2:2014 建筑用玻璃－基本碱土硅酸盐玻璃－第2部分：合格评价/产品标准。

EN 14179-2:2005 Glass in building-Heat soaked thermally toughened soda lime silicate safety glass-Part 2: Evaluation of conformity/Product standard
EN 14179-2:2005 建筑用玻璃－吸热热钢化钙纳硅酸盐玻璃－第2部分：合格评价/产品标准。
EN 14449:2005 Glass in building-Laminated glass and laminated safety glass-Evaluation of conformity/Product standard 
EN 14449:2005 建筑玻璃-夹层玻璃和夹层安全玻璃-合格评价/产品标准
EN 14449:2005/AC:2005 Glass in building-Laminated glass and laminated safety glass-Evaluation of conformity/Product standard
EN 14449:2005/AC:2005 建筑玻璃-夹层玻璃和夹层安全玻璃-合格评价/产品标准
EN 1748-1-2:2004 Glass in building-Special basic products-Borosilicate glasses-Part 1-2: Evaluation of conformity/Product standard
EN 1748-1-2:2004 建筑玻璃－特种基础产品－硼硅酸盐玻璃－第1-2部分:合格评价/产品标准
EN 1748-2-2:2004 Glass in building-Special basic products-Glass ceramics-Part 2-2: Evaluation of conformity/Product standard
EN 1748-2-2-2004 建筑玻璃－特种基础产品－玻璃陶瓷－第2-2部分:合格评价产品标准

EN 1863-2:2004 Glass in building-Heat strengthened soda lime silicate glass-Part 2: Evaluation of conformity/Product standard
EN 1863-2:2004 建筑用玻璃－热增强纳钙玻璃－第2部分: 合格评价/产品标准。
EN 1863-2:2004 Glass in building-Heat strengthened soda lime silicate glass-Part 2: Evaluation of conformity/Product standard
EN 1863-2:2004 建筑用玻璃－热增强纳钙玻璃－第2部分: 合格评价/产品标准。
EN15651-1:2012 Sealants for non-structural use in joints in building and pedestrian walkways-Part 1: Sealants for facade elements. EN15651-1:2012 建筑物和人行道连接处的非结构用密封胶-幕墙元件密封胶
EN15651-2:2012 Sealants for non-structural use in joints in building and pedestrian walkways-Part 2: Sealants for glazing.
EN15651-2:2012 建筑物和人行道连接处的非结构用密封胶-玻璃用密封胶
EN15651-3:2012 Sealants for non-structural use in joints in building and pedestrian walkways-Part 3: Sealants for sanitary joints.
EN15651-3:2012 建筑物和人行道连接处的非结构用密封胶-公共厕所连接处用密封胶
EN15651-4:2012 Sealants for non-structural use in joints in building and pedestrian walkways-Part 1: Sealants for pedestrian walkways.
EN15651-4:2012 建筑物和人行道连接处的非结构用密封胶-行人通道用密封胶

欧盟CE认证具体协调标准，请咨询南京睿督公司。

注意事项：
欧盟所有公告号实验室都可以颁发其能力范围的CE证书，在欧盟范围内都具有同等的权威性。
每个NB欧盟公告号都有自己的测试认证能力范围，并不是每个欧盟公告号可以做所有的测试及认证。
NB欧盟公告号能力范围见欧盟官网，南京睿督公司为TSUS-NB1301授权机构。

更多关于欧盟建材CE认证，欧盟公告号CE认证机构以及CE认证协调标准，请咨询南京睿督公司
南京睿督公司咨询电话：025-86583475  400-603-6575
网址：www.hksmartps.com
邮箱：info@hksmartps.com
……