Contact
- TEL： +86 25 8658 3475
- FAX：+86 25-8658 3457
- Email：info@fire-test.com
- Website：www.cprce.com
- Address：16F, Deying Mansion, No.118 Middle Jiangdong Road, Nanjing 210012, China
ETA
CE certification for nail nut bolt screw / anchor car / ETA certification
From：CABLE CPR CERTIFICATION Clicks：294 Time：2024-4-30
Our company is a Chinese authorized cooperative organization of TZUS Czech National Architectural Design and Research Institute, TZUS is registered under the European Commission registration number Notified Body 1020, TZUS is a globally renowned fastener testing & certification body, The organization has the full authorization capacity of the corresponding fasteners CE, If your fasteners are exported to the EU market, you need to apply for EN14592 (wood structure), EN14566 (plasterboard), EN14399 (high strength bolts & nuts & washer), EN15048 (ordinary bolts & nuts & washer) and other CE certification, You can consult the EU CE certification engineer of Nanjing Ruili Supervision Company, Professional consultation hotline +86 25-86583475.
TZUS is also one of the certification committee members of ETA (European Technical Approval) and can issue ETA certificates in accordance with relevant regulations. For fastener products to apply for ETA certification, you need to apply for ETA certification according to the EAD standards. If your products need to apply for ETA certification, we will provide EU ETA certification guidance.
The EU Building Products CPR regulations
Building fasteners are widely used in building construction, decoration, decoration and other fields. The technical level of fasteners for construction represents the developed degree of industrial and construction technology. Its product categories include steel structure bolt components, wood screws, gypsum board screws, expansion anka anchor bolts, chemical anchors, car repair gecko, internal gecko, external gecko, railing system glass clip, etc.
The CE certification of building fastener products has been following the building product instruction (i. e., the CPD instruction) for a long time so far. In order to more strictly implement the CE certification of building products, from 1 July 2013, the European Union issued the building product regulations (Construction Product Regulation No.305 / 2011 / EU CPR Regulation) has fully replaced the original building product CPD directive and entered the mandatory implementation phase. The new regulations greatly improve the requirements for building materials products, such as fire prevention and fire safety, energy conservation and environmental protection, health and noise impact. If the export enterprises do not meet the corresponding requirements, their products are difficult to be widely accepted in the European Union.
The European standards applicable to the CE certification of building fasteners mainly include the European Coordination standards (hEN) developed and approved by CEN, CENELEC and ETSI and the European Assessment Document (European Assessment Document) issued by the European Technical Accreditation Organization (EOTA). The purpose of establishing EOTA is to remove the technical barriers caused by the different standards and requirements for building materials products. The organization is composed of the European Technology Assessment Agency nominated by EU member states and members of the European Free Trade Agreement.
CE-certified products that meet the provisions of their performance declaration, can be marked with CE marks and circulated freely in the markets of the member states of the European Free Trade Agreement.
Pathway for CE certification 1: CEN pathway (refer to European coordinated standards)
① Documents to be submitted:
1. The Application Form Product certification application form
2, Description of the construction product Building materials product description
3. Product specifications Product specification list
4. Drawings product explosion diagram
If you want to further understand the construction product regulations, welcome to contact us!
② EN Certification Basic process:
1. Determine the applicable European Coordinating standard (hEN) for the product, and submit the application for testing or certification to the qualified European Union Notified Body (Notified Body) according to the Performance Stability Assessment Certification System level (AVCP System) within the standard.
2. Determine the necessity of the product required statement, and the final test and evaluation protocol will be developed in combination with the coordination criteria and the required performance statement.
3. The EU announcement body shall perform the certification work in combination with testing, calculation and factory production control audit, and issue the type test report, factory production control audit report and issue the CE certificate.
4. CE mark your product and make a DOP product performance statement
5. The certificate is continuously monitored by the EU notified body of the European Technical Assessment (European Technical Assessment) and the Building Product Regulation (CPR).
Route 2 for CE certification: EOTA pathway (reference to European assessment document)
① The required submission
1. The Application Form Product certification application form
2, Description of the construction product Building materials product description
3. Product specifications Product specification list
4. Test reports Product performance test report (if the manufacturer has applied for testing for the product)
5. Drawings product explosion diagram
6, The intended use of the product installation and use instructions
② Basic process of ETA certification:
1. Determine that the product is applicable to the European Assessment Document (European Assessment Document), submit the assessment applications to the European Technical Assessment Agency (Technical Assessment Body), and submit the necessary technical documents.
2. To determine the necessity of the product declaration, the final test and evaluation protocol will be developed in combination with the evaluation document and the performance that must be declared.
3. By the European technology assessment agency (Technical Assessment Body) through testing or calculation of product technology evaluation, and issue the European technology assessment (European Technical Assessment), EOTA will be the European technology assessment within the scope of the public a period of time, in the period such as the member state of the technical assessment agency has no objection, the European technology assessment can take effect.
4. Apply for certification from qualified EU notified bodies as required in the European Technical Assessment (European Technical Assessment). ETA certificate are issued by the agency
5. CE mark your product and make a DOP product performance statement
6. Continued supervision of the manufacturer by the Eauthority under the European Technical Assessment (European Technical Assessment) and the Building Products Regulation (CPR).
CE marks must be added to the product by the manufacturer or the manufacturer''s authorized representative in the EU. CE marks must be clearly and permanently added to the product or its nameplate as per its standard pattern. For products certified by the EU announcement body, the logo must contain the announcement number of the announcement body. The manufacturer is obliged to draft the DOP product performance statement and to be signed by the principal to prove that its products in the EU market consistently meet coordinated standards or European technical assessment requirements. After the above six steps, your products with the CE logo can circulate smoothly in the EU market.
Reference catalogue of European coordinated standards
EN 15048-1 Non-preloaded structural bolting assemblies non-preload structural bolt assembly
EN 14399-1 High-strength structural bolting assemblies for preloading preload with high strength structural bolt assembly
EN 14592 Timber structures Dowel-type fasteners, pin-type fasteners for wood frame
EN 14566 Mechanical Fasteners for the Mechanical fasteners for gypsum plasterboard systems plasterboard system
European Technical Assessment (ETA)
EAD 330232-00-0601 Mechanical fasteners for use in concrete Mechanical fasteners for concrete (gec, anchor, etc.)
EAD 330449-00-0601 Bonded fasteners for use in concrete bonded anchor bolt for concrete
EAD 330196-00-0604 Plastic Anchors for ETICS plastic anchor bolt for fixed external insulation composite system
ETAG 015 Three-dimensional nailing plates
ETAG 020 Plastic Anchors for multiple use in concrete and masonry for non-structural applications concrete and masonry structures with plastic anchors
EAD 330076-00-0604 Metal injection anchors for use in masonry metal injection anchor for Metal injection anchors for use in masonry masonry
EAD 130019-00-0603 Dowel-type fasteners with resin coating resin coated positioning pin type fasteners
EAD 130033-00-0603 Nails and screws used on Nails and screws for use in nailing plates in timber structures timber structure nail plates
EAD 130118-00-0603 Screws for use in timber constructions wooden construction screws
EAD 160004-00-0301 Post-tensioning systems for prestressing of structures structure
EAD 200002-00-0602 Tension Rod System Pull rod system
EAD 200033-00-0602 Nailed shear connector shear nail connector
EAD 330008-02-0601 Anchor channels slot-type embedded parts
EAD 330011-00-0601 Adjustable concrete screws Adjustable cement screw
EAD 330012-00-0601 Cast-in anchor with internal threaded socket internal thread-hole embedded anchor bolt
EAD 330014-00-0601 Metal anchor for use in autoclaved aerated concrete metal anchor bolt for autoclaved aerated concrete
EAD 330030-00-0601 Fastener of external wall claddings, fasteners for external wall covering
EAD 330046-01-0602 Fastening Screws for Metal Members and Sheeting fastening screws for metal members and sheets
EAD 330047-01-0602 Tighten the screws for the Fastening Screws for Sandwich Panels sandwich plate
EAD130186-00-0603 Three Dimensional Nailing Plates 3-D Fastener
EU ETA certification is more complex, because car repair gecko, inner forced gecko, casing gecko, anchor gecko, elevator gecko and other fastener hardware do not belong to the European unified standard certification scope, so they are rated as innovative products, and CE logo can only be used through ETA certification.
Nanjing SMART Company is the authorized cooperative laboratory of the EU Announcement number Notified Body Laboratory, which can directly accept the CE certification and ETA certification of fasteners such as nail nut bolts and screws.
Nanjing SMART company consulting telephone number: +86 25-8658 3475 + 86 25 8658 3465
URL: www.hksmartps.com www.cprce.comEmail address: info@hksmartps.com
苏公网安备 32010502010104
Wechat
