TORQUE-CONTROLLED EXPANSION FASTENERS ETA certification introduction

From：CABLE CPR CERTIFICATION Clicks：245 Time：2024-4-30

Torque-controlled expansion fasteners need to apply for ETA certification according to the EAD standard specification. Nanjing Smart company provides Torque-controlled expansion fasteners ETA certification EAD 330232-00-0601, EU ETA certification consultation telephone: +86 25-86583475, website: www.hksmartps.com

He is familiar with the EU CPR, regulations and ETA certification process

Nanjing SMART authorized cooperative laboratory for the eu NB and TAB institutions, can simultaneously accept building materials EU CE certification and EU ETA certification. Nanjing SMART provides customers with professional and compliant EU CE certification and ETA certification, reduce the certification of intermediate communication links, authority to save time and effort.

EAD 330232-00-0601 Mechanical fasteners for use in concrete Mechanical fasteners for concrete (gec, anchor, etc.)
EAD 330232-01-0601 TORQUE-CONTROLLED EXPANSION FASTENERS FOR USE IN CONCRETE WITH VARIABLE WORKING LIFE UP TO 50 YEARS

What is an ETA certification?

European Technology Assessment European technical assessments for short "ETA", the main content of the European technology Assessment is information about the intended use, performance and basic characteristics of the product. The Technical Assessment Agency (TAB) publishes the European Technical Assessment under the European Assessment Document (EAD) approved by the European Technical Assessment Organization (EOTA).

ETA provides access to CE marks for building products that are not covered or fully covered by coordinated standards. The legal basis for the ETA procedure is the European Building Products Regulation (No 305 / 2011 / EU, especially articles 19 and 26, where the "Building Products Regulation" has the level of the European Act and can be directly applied to the Member States.

Documents required for ETA certification

1. The Application Form Product certification application form
2, Description of the construction product Building materials product description
3. Product specifications Product specifications
4. Test reports product testing report (if the manufacturer has applied for testing for the product)
5. Drawings product explosion diagram
6. The intended use of the product Product use instructions

ETA certification process

1. Determine Product ETA Standards (European Assessment Document)

The SMART is the EU Building Product Regulation (EU) 305 / 2011 (CPR), the EU coordination standard is a detailed technical document used to guide the product to meet the basic requirements of the directive.

2. Determine the detailed requirements that the product should meet

The product meets all the requirements of its applicable coordinating standards and is deemed to meet the relevant basic requirements. Whether the coordination standard applies is completely voluntary, and you can also choose other ways to meet the corresponding basic requirements.

3. Determine whether the product needs the announcement agency to participate in the inspection

Each directive for your product has detailed provisions on whether a third party is needs to participate in the ETA review. These notified bodies are authorized by the European Commission and have detailed lists in the archives of the NANDO (New Methods Directive notified bodies and designated bodies).

4. Test the product and test its compliance

It is the responsibility of the manufacturer to test the product and check its compliance with the EU regulations (compliance assessment process). Risk assessment is the basic rule in the assessment process, and it meets the requirements of the relevant EU coordination standards before you may meet the basic requirements of the official EU regulations.

5. Draft and save the technical documents required by the ETAG standards

The manufacturer must establish the technical assessment document European Assessment Document (EAD) for the product according to the requirements of the directive and the needs of the risk assessment. If required by the relevant authorized authority, the manufacturer shall submit the technical documents and the EC compliance statement together for inspection.

6. Add ETA mark on your product and make EC compliance statement

The ETA mark must be affixed to the product by the manufacturer or its authorized representative. The ETA logo must be clearly and permanently affixed to the product or its nameplate according to its standard pattern. If the notified body is involved in the certification of the product, the ETA mark must contain the notice number of the notified body. The manufacturer is obliged to draft the EC compliance statement and sign it to demonstrate that the product meets the ETA requirements.

After the above six steps, your products with the CE logo and the ETA logo can be made smoothly circulated in the European market.

The company SMART provides ETA certification, ETA report, ETA evaluation report, fastener ETA certification, car repair gecko bolt ETA certification, car repair gecko ETA, certification, etc

Nanjing SMART authorized cooperative laboratory is also an EU NB and TAB organization, and can simultaneously accept the building materials eu CE certification and the EU ETA certification. Nanjing SMART provides customers with professional and compliant EU CE certification and ETA certification, reduce the certification of intermediate communication links, authority to save time and effort.

Nanjing SMART company consulting telephone number: +86 25-86583475 +86 25 86583465
URL: www.hksmartps.com www.fire-test.com
Email address: info@hksmartps.com

……

Previous： ETA certificate/EAD Number (download)
Next： Fasteners of metal members and guard plates EU ETA certification EAD-330046-01-0602

线缆CPR认证

Certification

Standard

Contact

TORQUE-CONTROLLED EXPANSION FASTENERS ETA certification introduction