EOTA Technical reports (EOTA TR001~EOTA TR082)

From：CABLE CPR CERTIFICATION Clicks：397 Time：2024-4-30

EOTA Technical Reports (EOTA TR)are developed assupporting reference documentsto other EOTA publications, especially European Assessment Documents (EAD). They are often developed alongside and together with these EADs, to cover aspects that go beyond the pure product assessment or beyond a single EAD.

As such, EOTA TRs detail relevant aspects such asdesign, execution or on-site testing. They may also containhorizontal assessment methodsrelevant for multiple EADs. They reflect the common understanding of the Technical Assessment Bodies in EOTA of the state of the art at a particular point in time. Technical reports can be revised or updated. Amended TR versions supersede the previous ones.

Technical Report number Technical Report title Year
EOTA TR001 Determination of impact resistance of panels and panel assemblies 2003
EOTA TR002 Test methods for light composite wood-based beams and columns 2000
EOTA TR003 Determination of the watertightness 2004
EOTA TR004 Determination of the resistance to delamination 2004
EOTA TR005 Determination of the resistance to wind loads of partially bonded roof waterproofing 2004
EOTA TR006 Determination of the resistance to dynamic indentation 2004
EOTA TR007 Determination of the resistance to static indentation 2003
EOTA TR008 Determination of the resistance to fatigue movement 2004
EOTA TR009 Determination of the resistance to sliding 2004
EOTA TR010 Exposure procedure for artificial weathering 2004
EOTA TR011 Exposure procedure for accelerated ageing by heat 2004
EOTA TR012 Exposure procedure for accelerated ageing by hot water 2004
EOTA TR013 Determination of crack-bridging capability 2004
EOTA TR014 Exposure procedure for accelerated ageing of glass reinforced unsaturated polyester resins by two-hour water boil 2004
EOTA TR015 Principle for the static calculation of connections made with three dimensional nailing plates, with examples 2002
EOTA TR016 Method of testing Three-Dimensional Nailing Plates with examples 2012
EOTA TR017 Worked example calculation of characteristic load-carrying capacities of 90° angle bracket with a rib 2012
EOTA TR018
superseded by EAD 330499 Assessment of torque-controlled bonded anchors 2003
EOTA TR019 Calculation models for prefabricated wood-based Loadbearing stressed skin panels for use in roofs 2005
EOTA TR020 Evaluation of Anchorages in Concrete concerning Resistance to Fire 2004
EOTA TR021 (old version) Reaction to fire requirements for small components 2005
EOTA TR021 Reaction to fire requirements for small components 2020
EOTA TR022 Determination of the resistance to the passage of chloride ions through a waterproofing layer subjected to indentation by aggregate 2007
EOTA TR023
superseded by EAD 330087 Assessment of post-installed rebar connections 2006
EOTA TR024 (old version) Characterisation, Aspects of Durability and Factory Production Control for Reactive Materials, Components and Products 2009
EOTA TR024 Technical description and assessment of reactive products effective in case of fire 2019
EOTA TR025 Point thermal transmittance of plastic anchors for etics 2016
EOTA TR026 Plate stiffness of plastic anchors for ETICS 2016
EOTA TR029
superseded by EN 1992-4:2018 Design of Bonded Anchors 2010
EOTA TR030 Factory made boards and products formed by moulding of a silicate polystyrene composite 2008
EOTA TR031 Fire Resistance Tests for Cavity Barriers 2008
EOTA TR032 Bending Test for swivel Joints made of PVC-U 2009
EOTA TR033 Test method for discontinuously laid bituminous roof covering products – Determination of watertightness 2009
EOTA TR034
Superseded by EOTA GD14 General BWR3 Checklist for EADs/ETAs - Dangerous substances 2015
EOTA TR035 Rules for extended application of test results of fire resisting elements 2013
EOTA TR036 A factory made structural anchor for attaching personal fall protection equipment, designed to be permanently fully bonded to a multilayered modified bitumen roof waterproofing system provided with polyester reinforcement to a maximum roof slope of 15°, without perforating the roof waterproofing system 2013
EOTA TR037 Test method for elastomeric insulating elements – Determination of creep 2011
EOTA TR038 Assessment procedure for durability of thin metallic composite panels 2017
EOTA TR039
superseded by EOTA TR078 Ventilated fa?ade system with self-supporting composite panels 2013
EOTA TR040 Factory-made boards and products formed by moulding of an expanded polylactic acid (EPLA) for thermal and / or acoustical insulation 2012
EOTA TR041 Non-reinforcing hexagonal geogrid for the stabilization of unbound granular layers by way of interlock with the aggregate 2017
EOTA TR042 Plastics piping kits for heating systems, consisting of pipes made of PB-R and mechanical and or welded fittings 2012
EOTA TR043 Plastics piping kits for the underground transport under pressure of water not intended for human consumption, made of glass reinforced filament wound epoxy (GRE) 2013
EOTA TR044 Acoustic evaluation of Lightweight Building Structures 2013
EOTA TR045
superseded by EN 1992-4:2018 Design of Metal Anchors For Use In Concrete Under Seismic Actions 2013
EOTA TR046 Test methods for foam adhesives for External Thermal Insulation Composite Systems (ETICS) 2014
EOTA TR047 (old version) Design of anchor channels 2018
EOTA TR047 Design of anchor channels in addition to EN 1992-4 2021
EOTA TR048 Details of tests for post-installed fasteners in concrete 2016
EOTA TR049 Post-installed fasteners in concrete under seismic action 2016
EOTA TR050 (old version) Anchor channels under fatigue loading 2015
EOTA TR050 (old version) Calculation Method for the Performance of Anchor Channels under Fatigue Loading 2018
EOTA TR050 Calculation method for the performance of Anchor channels under Fatigue Cyclic Loading 2022
EOTA TR051 (old version) Recommendations for job-site tests of plastic anchors and screws 2016
EOTA TR051 Recommendations for job-site tests of plastic anchors and screws 2018
EOTA TR052 Recommendations for job-site tests of powder-actuated fasteners for ETICS for use in concrete 2017
EOTA TR053 (old version) Recommendations for job-site tests of metal injection anchors for use in masonry 2016
EOTA TR053 Recommendations for tests of metal injection anchors for use in masonry to be carried out on construction works 2022
EOTA TR054 (old version) Design methods for anchorages with metal injection anchors for use in masonry 2016
EOTA TR054 (old version) Design methods for anchorages with metal injection anchors and screw anchors for use in masonry 2022
EOTA TR054 Design methods for anchorages with metal injection anchors and screw anchors for use in masonry 2022
EOTA TR055 Design of fastenings based on EAD 330232-00-0601, EAD 330499-00-0601 and EAD 330747-00-06-01 2018
EOTA TR058 Increase of punching shear resistance of flat slabs or footings and ground slabs –lattice girders- Calculation methods 2017
EOTA TR060 Increase of punching shear resistance of flat slabs or footings and Ground slabs – double headed studs –Calculation Methods 2017
EOTA TR061 (old version) Design method for fasteners in concrete under fatigue cyclic loading 2018
EOTA TR061 Design method for fasteners in concrete under fatigue cyclic loading 2020
EOTA TR062 Design of fasteners for facade panels made of natural stone
(except slate) 2018
EOTA TR064 (old version) Design of plastic anchors in concrete and masonry 2018
EOTA TR064 Design of plastic anchors in concrete and masonry 2022
EOTA TR065 Design of structural joints with shear dowels 2019
EOTA TR066 (old version) Design and requirements for construction works of post-installed shear connection for two concrete layers 2019
EOTA TR066 (old version) Design and requirements for construction works of post-installed shear connection for two concrete layers 2019
EOTA TR066 Design and requirements for construction works of post-installed shear connection for two concrete layers 2020
EOTA TR067
superseded by EAD 200102 Bending of column shoe connections - tests and results 2018
EOTA TR068 (old version) Calculation methods for column shoe connections 2018
EOTA TR068 Design of structural connections with Column Shoes 2020
EOTA TR069 (old version) Design method for anchorage of post-installed reinforcing bars (rebars) with improved bond-splitting behavior as compared to EN 1992-1-1 2019
EOTA TR069 Design method for anchorage of post-installed reinforcing bars (rebars) with improved bond-splitting behavior as compared to EN 1992-1-1 2021
EOTA TR070 Design of Glued-in Rods for Timber Connections 2019
EOTA TR072 Provisions for the determination of construction products’ propensity to undergo continuous smouldering in EADs 2020
EOTA TR074 (old version) Design of wire loop systems for the connection of precast and in-situ concrete elements 2020
EOTA TR074 Design of wire loop systems for the connection of precast and in-situ concrete elements 2022
EOTA TR075 Design of bonded screw fasteners for use in concrete 2020
EOTA TR076 Design of mounting channels 2020
EOTA TR077 Design methods for distance fixing systems for use in concrete and masonry 2022
EOTA TR078 (old version) Determination of fire-related characteristics of external wall cladding in EADs 2021
EOTA TR078 Determination of fire-related characteristics of external wall cladding in EADs 2023
EOTA TR079 Increase of punching shear resistance of footings and ground slabs - S-shaped double headed elements - Calculation of design 2022
EOTA TR080 Design of plastic anchors for fixing fa?ade claddings through angle brackets in masonry and concrete under seismic action 2022
EOTA TR082 Design of bonded fasteners in concrete under fire conditions 2023

Tel: +86 25 8658 3475 +86 25 8658 3465
Website: www.hksmartps.com www.cprce.com
Mail: info@hksmartps.com
wechat: firetesting or 17714189018

...

线缆CPR认证

Certification

Standard

Contact

EOTA Technical reports (EOTA TR001~EOTA TR082)